Blended Ortho/Polyphosphate

Back to products

A tuned blend that sequesters iron and manganese while an orthophosphate fraction builds a protective film on lead and copper surfaces — ideal where water chemistry demands both clarity and corrosion control.

Systems blending groundwater with surface water, or drawing on wells with measurable iron, often find that a single feed point handles both problems more predictably than two separate chemical programs. Because the ratio is blended to your water rather than sold as a fixed formula, we start with a bench evaluation of your raw and finished water and set the ortho-to-poly split against your corrosion-control targets and your discolored-water complaint history. We then profile poly, ortho, and total phosphate residuals so the compliance-critical fraction is always measurable on its own.

Applications
Simultaneous sequestration and corrosion control
Systems with discolored-water complaints
Blended groundwater and surface-water supplies
Phosphate ratio tuned to your water chemistry
LCRI 2027

Controls corrosion and discolored water at once, so aesthetic complaints never mask a compliance risk.

Blended Ortho/Polyphosphate
Specifications
Chemistry
Blended ortho/polyphosphate
Typical feed
1.0–5.0 mg/L as PO₄
Certification
NSF/ANSI/CAN 60
Form
Liquid
Packaging
Bulk
Tote
Drum
Mini Bulk
Common questions

About Ortho/Polyphosphate

Can the ortho to poly ratio be adjusted?

Yes. The ratio is blended to your water chemistry and treatment goals, which is why we start with a bench evaluation of your raw and finished water.

Will a blend mask a corrosion problem?

No, and that is the point of measuring both fractions. We profile poly, ortho, and total phosphate residuals so you can confirm the corrosion-control portion is doing its job independent of the sequestration benefit.

Is this product NSF certified for drinking water?

Yes, it is certified to ANSI/NSF/CAN Standard 60 for drinking water treatment chemicals.

What packaging is available?

Bulk up to 4,000 gallons, 275-gallon totes, drums in 15, 30, and 55 gallons, and mini bulk on request, delivered on our own fleet.

Where do I find the safety data sheet and technical data sheet?

Both are available from our SDS library and from your Usalco technical representative. Ask for the current revision when you request a quote.

Was this product previously sold by Shannon Chemical?

Yes. Shannon Chemical Corporation is now a Usalco company, and this product continues to the same specification under the Usalco name.