Ferric Sulfate Solution
USALCO® manufactures Ferric Sulfate in three strengths (50%,60%, and 65%) with different soluble iron percentages. These chemistries are appropriate for use as a coagulant or flocculant in water or wastewater treatment. All concentrations of our Ferric Sulfate are NSF approved and meet all ANSI/NSF/CAN 60 requirements.
Ferric Sulfate has been proven to be very effective when used in the following applications:
- Coagulation – Drinking Water & Wastewater
- Cold Water Treatment
- Heavy Metals Removal (arsenic, selenium)
- Odor Control
- Phosphorus Removal
- Sludge Thickening Conditioning and Dewatering
- Struvite Control
Ferrous Sulfate Solution
We produce Ferrous Sulfate in two strengths, 5% Fe2+ and 7% Fe2+, for use in water and wastewater treatment. Ferrous Sulfate is well known for its effectiveness in odor control and chlorite reduction when chlorine dioxide is used during the pre-treatment of raw water or where high levels of Chlorite are present. All concentrations of USALCO’s Ferrous Sulfate are NSF approved and meet all ANSI/NSF/CAN 60 requirements.
Ferrous Sulfate has been proven to be very effective in the following applications:
- Chlorite Removal
- Coagulation – Drinking Water & Wastewater
- Heavy Metals Removal
- Odor Control
- Phosphorus Removal
Ferrous Sulfate and Ferric Sulfate Blends
USALCO has the capability to manufacture custom blends of both Ferric and Ferrous Sulfate to meet customer application needs. Typically, these blends contain polymer, ACH, or other additives. Please contact your USALCO representative for more detailed information on our capabilities in this area.