DelPAC® 2450 is a widely accepted polyaluminum chloride solution that is known for its cost-effective benefits in improving water quality. As a coagulant, it can provide longer filtration runs, minimize the need for pH adjustment with alkali, and decrease the amount of sludge residuals. This product meets the standards set by the American Water Works Association Standard B408-18 and complies with NSF/ANSI/CAN 60: Drinking Water Treatment Chemicals

At the upper end of the basicity range, minimal pH depression, can be used in high pH systems.Used in TOC reduction, metals removal, FOG.Used in water treatment as a primary coagulant for the removal of turbidity, color, suspended solids, heavy metals, and phosphorus.

Applicable Processes

Color Removal, Drinking Water Treatment, Heavy Metals Removal, Industrial Water Treatment, Phosphorus Removal, Suspended Solids Removal, TOC Removal, Turbidity Removal, Wastewater Treatment, Water Treatment

Dosing

DelPAC 2450 must be administered directly into raw water, wastewater, or stock flow using an appropriate acid-resistant dosing pump. It is advised against diluting the product before its administration. The dosing system should be set up to ensure thorough mixing. The ideal dosage should be determined on a case-by-case basis, such as through laboratory testing. For guidance on usage, you are welcome to reach out to the USALCO team at any time.

Storage Tanks & Piping

Tanks may be constructed of fiberglass/epoxy, or lined steel. Polypropylene or polyethylene tanks have also been used. Schedule 80 PVC or polymer lined piping can be used. Glass reinforced plastic or hard rubber are also suitable materials for piping.

Chemical Family

Aluminum Compounds, Aluminum Salts, Chlorides, Sulfates

Product Type

Coagulant

Certifications
  • American Water Work Association (AWWA) Certified
  • NSF Approved
  • NSF/ANSI 60
  • NSF/ANSI/CAN 60
CAS Registry Number

39290-78-3

Related Case Studies

Related Resources